Course – 30 days
Exam – 10 more days
Approximately 20 hours
The NDTclassroom Level II Eddy Current course addresses the theory and principles related to general surface scanning techniques including emphasis on evaluation of test results. In addition, it covers general aerospace applications.
The course and training manual are provided with graphics from multiple sources with demonstrations using test systems provided by several manufacturers.
This course is based on the body of knowledge as defined in ANSI / ASNT CP-105. The training also provides detailed information and guidance on how to perform a wide range of inspection applications. Other key applications include:
– near surface cracking of nonferritic alloys
– conductivity measurement
– second-layer corrosion
– near surface flaw detection in ferritic welds- near surface cracking in ferritic alloys
– bolt hole testing
– cracks under fasteners / ring probe
– cracks under fasteners / sliding probe
– near surface cracking in ferritic alloys
This course meets the recommendations for training as described in SNT-TC-1A.
NOTE: There is a course specific manual provided at beginning of the course. The use of this manual in addition to self-study is strongly encouraged and will add to the overall training benefit and time to be credited. It will also better prepare the student for the practical lab/’hands-on” session. It is recommended that the student a log of the self-study time. It is also recommended that the applicable Level III be involved and confirm that the reading and self-study assignments have been completed. This should become a part of the student’s training records which may be used in conjunction with subsequent certifications.
Meets all ASNT ANSI SNT-TC-1A recommendations per CP-105. Students can typically retain 25% to 60% more of the information as compared to traditional classroom training.
EASY TO ACCESS
Participants can access the course 24/7 from any computer running Google Chrome browser with an internet connection.
EASY TO USE
Pause to take notes with ability to retake lesson quizzes as needed. Online learning gives the student complete control over their learning experience.
EASY TO UNDERSTAND
Audio/Video narration, demonstrations, animated graphics and video footage make even the most complex topics engaging and easy-to-understand.
Detailed video demonstrations, practice problems, and quizzes facilitate the mastery of concepts and measure content retention.
Course content was developed by Chuck Hellier with industry experts and NDT Classroom Inc. learning professional Kevin Crosby, Phd in curriculum design.
ACCESS TO NDT CLASSROOM INSTRUCTOR
Users can contact NDT Classroom instructors by emailing info@NDTclassroom.com or calling 716-262-8870.
NDT Classroom customer support Monday through Friday 8:30 AM to 5:00 PM EST. at info@NDTclassroom.com or 716-262-8870
Eddy Current II Chapter 1 – Materials Processing
Eddy Current II – Quiz 1
Eddy Current II Chapter 2 – Principles
Eddy Current II – Quiz 2
Eddy Current II Chapter 3 – Test Coil Arrangements
Eddy Current II – Quiz 3
Eddy Current II Chapter 4 – Test Systems
Eddy Current II – Quiz 4
Eddy Current II Chapter 5 – Test System Response
Eddy Current II – Quiz 5
Eddy Current II Chapter 6 – Test Instruments
Eddy Current II – Quiz 6
Eddy Current II Chapter 7 – Applications
Eddy Current II – Quiz 7
Eddy Current II – Labs
Eddy Current II – Final Exam